Bienvenido al portal de seminarios web de MAGMAacademy

Aquí puede encontrar todos los seminarios web que hemos preparado hasta la fecha. Puede ver la lista de seminarios dándole clic en un grupo de interés a la derecha.

MAGMAacademy investiga constantemente nuevos métodos para proporcionar a nuestros clientes. Creemos que solo determinados temas son adecuados para ser comunicados a través de un seminario web. Estos seminarios web, son sesiones cortas, por lo general de menos de una hora, donde se puede analizar una característica o un concepto nuevo. La interacción  no es limitada durante un seminario web, dado que se pueden hacer comentarios, preguntas, y platicas, una vez que se finalizan.

Agradecemos todas las sugerencias que nos puedan dar nuestros clientes respecto a los temas de su interés. Envíe un correo electrónico a MAGMAacademy con sugerencias de seminarios web, si no ve su tema de interés en la lista a continuación. Mostrar correo electrónico

Lo invitamos a regresar continuamente ya que preparamos seminarios web nuevos cada mes.

HPDC Case Study: Casting Distortion

In the first episode of our case study series, we will be reviewing real world castings and providing real world solutions.

Leer más

HPDC Case Study: Casting Distortion

In the first episode of our case study series, we will be reviewing real world castings and providing real world solutions.

Leer más

HPDC Case Study: Casting Distortion

In the first episode of our case study series, we will be reviewing real world castings and providing real world solutions.

Leer más

Predicting Contact Shrinkage in Ductile Iron Castings Pt2

This is the Second of two episodes where contact shrinkage in some ductile iron castings is investigated. This second episode will look at some examples where shrinkage at the riser contact is an issue.

Leer más

Riser Design for Steel Castings

In this webinar we take a close look at key concepts for designing risering systems for steel castings

Leer más

Predicting Contact Shrinkage in Ductile Iron Castings Pt1

This is the first of two episodes where contact shrinkage in some ductile iron castings is investigated. This first episode will look at some examples where shrinkage at the gate(s) is an issue.

Leer más

Distortion Caused by Quenching and Trimming

In our last webinar, we experimented with die open times and now we are finishing up the process with investigating trimming and quenching.

Leer más

Troubleshooting a Failure in Service Using MAGMASOFT®, MAGMAstress and MAGMAsteel

We will be using MAGMASOFT®, MAGMAsteel and MAGMAstress to see if this failure could have been prevented from occurring if the appropriate simulation tools had been used up front, before castings were made, and before the customer was made very angry.

Leer más

Fast Shot Velocity Influence on Casting Quality

In this webinar we looked at how fast shot speed plays a big role in casting quality and we will dive into the pros and cons of adjusting it.

Leer más

Automated Change of Riser Sizes and Locations For Steel Castings

With Autonomous Optimization in MAGMASOFT®, riser locations and sizes can be changed and optimal designs can be identified without requiring the engineer to manually make changes to CAD models.

Leer más
Este sitio utiliza cookies para ofrecerle una mejor experiencia de navegación Políticas de privacidad